Equipment

• 15 complete mobile workover rigs, with the capacity from 50 – 180t, type: Cardvell, Wülfel, NGM and A-50
• Mud pumps: T-10, 9MGR, 9MGR-61 and JWS-400
• 3 complete mud system
• Workshop – full covered with fishing tools\operation, maintenance for packers & downhole tools, BOP`s, christmas tree …

KB-700-54 (Cardwell IV)

• Drawworks IPS CARDWELL model KB700
• Horsepower 800 HP
• Hydromatic PARMAC 22DR Crown-o-matic
• Automatic drilling Control lNA
• 2 x GM 71-8; 400 HP Diesel engine through compound
• 1/8” Drill Line
• Single line pool57.200 lbs (26000 Kg)
• Depth rating Servicing with 2 7/8” tubing: 25000 ft
• Drilling with 3 ½” Drill pipe: 14000 ft, Drilling with 4 ½” drill pipe: 12000 ft, Drilling with 5” drill pipe: 9000 ft
• Sand drum 13-37 with brakes 16114 ft capacity with 9/16” line or 12955 ft capacity with 5/8” line
• Chain drive through catwork
• 1 x Mud pump TMP700 Rated 700 HP independent drive CAT 3516 or equivalent1 x Mud pump PZH-8 Rated 750 HP Independent drive CAT D-3982 x 89 GPM @2000 psi installed on the trailer
• MacScott Bond Hydraulic 30 m/min; 120m long 11mm wireline 6x36IWRCIPS
• Cardwell mast Model 375-118 two section, telescopingRated 375.000 lbs ( 170 ton) w/10 linesHeight 118 feet.
• Racking capacity: 19000 ft drill pipe 2 7/8”doubles or 14000 ft drill pipe 3 ½” doubles or 12000 ft 4 1/2” drill pipe doubles Max. wind load 100 mph –no set back
• Maximum wind load 85 mph- w/set back
• IPS CARDWELL substructure + additional pony substructure with ramp.Overall height 15 ft + 4 ft =19 ft (6,23 m)281000 lbs
• Total Clearance 5,60 m-375.00 lbs (170 ton)
• IPS Cardwell two shaft-eight sheave: 5 sheaves 33 ½” diameter and 3 x 23 ½” sheaves. Seven sheaves grooved for 1 1/8” drilling line and one sheave grooved 5/8” for sandline.

Self – propelled workover rig Cardwell KB-210A (CI, CII i CIII)

• Working load capacity of mast – two section, telescoping : 100 Ton
• Working hook capacity: 100Ton
• Main drum: wire rope ∅ 1”, L=240m
• Sandline drum: wire rope ∅ 5/8mm, L= 3000m
• Engine: GM 8V71, capacity 320 HP
• Transmission: Allison CLT 5860-5
• Rotary table HACKER A-15-T 15 ¼” 140 tons
• Working platform(substructure) with clear height bellow rotary max 3m
• Number of sheaves of travelling block/crown block systemPc3+5
• Maximum length of handled pipe stands 19m
• Number of draworks speeds 5+1
• Constant pressure in pneumatic system 10 bar
• Dimension in transport configuration: length 18 m width 2,56 m height 4,15 m
• Depth ratings: drilling pipe 4 1/2″ – 1400 m drilling pipe 3 1/2″ – 1830 m
• Generator “FG Wilson” 350KVA
• Generator “FG Wilson” 60KVA

Self-propelled workover rig NGM-1000 (NGM II, NGM III i IV)

• Made by: Naftagas Novi Sad – Yugoslavia and Metalna Maribor – Slovenia
• Model: NGM 1000-29-233 Rated static and hook load capacity: 100 t
• Manufactured: 1988
• Serial number 02001

Self-propelled workover rig NGM-1000 (NGM II, NGM III i IV)

Mobile workover rig contains:

• Carrier
• Diesel engine with transmission
• Drawworks and mast
  Model: Metalna Maribor
  Total weight: 45 tons
  Total lenght: 18900mm
  Max.height: 4200mm
  Max width: 2500mm
  Number of axles: 4 Number of power axles (front+rear): 1+2
  Number of vehicicles (single + double): 4+4

Rig Type	CARDWELL  KB700	CARDWELL  KB210A	CARDWELL KB210A	FRANKS 200	Naftagas-Metalna NGM-700
Rig name	CW-4	CW-2	CW-3	F200	M-1
Manufacturer	Cardwell	Cardwell	Cardwell	FRANKS	Naftagas – Metalna
Year	1988	1981	1983	1990	1984
Year of last overh.	2013	2010	2005	2004	2000
Country of origin	USA	USA	USA	USA	Yugoslavia
Drawworks (HP)	800	450	320	256	256
Hook Load (Tone)	170	100	100	63	70
Mud Pump (HP)	1×450  1990	1×180  1975	1×180   2005	1×180  1980	1×180   1980
Floor Height (Meters)	4,54	3,2	3,2	2,4	2,4
Location country	Serbia	Serbia	Serbia	Serbia	Serbia
		Operating NIS	Operating NIS	Operating NIS	Overhaul

 

Rig Type	Naftagas-Metalna NGM-1000	KRAZA-50	UPA 60/80 1,2,3	Wullfell	UPA 60/80 1,2,3
Rig name	M-2,M-3,M-4	A-1,A-2, A-3,A-4	B1, B2, B3	W-1,W-4	B-4
Manufacturer	Naftagas – Metalna	Sankt Petersburg	Kaljazin Rusija	Wulfell	Kaljazin Rusija
Year	1987,1988,1988	1971,1976, 1982,1982	2012	1959, 1968	2013
Year of last overh.	2009, 2010, 2008
Country of origin	Yugoslavia	Russia	Russia	Germany	Russia
Drawworks (HP)	320	240	340	220	340
Hook Load (Tone)	100	40,50, 40,50	60/80	25,24	60/80
Mud Pump (HP)	1×180   1980	1×180   1980	1×180   1980	1×180   1980	1×180   1980
Floor Height (Meters)	2,4	1,8	2,4	1,8	2,4
Location country	Serbia	Serbia	Serbia	Serbia	Serbia
	Operating NIS	Operating NIS	Operating NIS	Operating NIS	Potrebna registracija

 

Reference

2000-2011 CIS – Rosby, Turkmenistan

Contract for workover rig Cardwell KB-700 2002-2008 Turkmennjeft, Turkmenistan
Contract for coiled tubing unit
Contract for wireline unit

2001-2006 Lucas, Kazakhstan

Contract for charter expertly personel

1997-1999 Monument, Turkmenistan

Contract for workover rig Cardwell KB-700 with key personel
Contract for Cardwell KB-700 as drilling rig on well to 4800m.

1983-1987 N.R.A., Jordan

Contract for workover rig Cardwell KB-210 – Cardwell 3

More than 56 years successfully working in Serbia

Workover operations\completition for gas storage wells – Gas storage “Banatski Dvor”